TViX 6500A firmware-opdatering...

Hej!

Jeg har anskaffet mig en TViX 6500A. Den virker som sådan fint nok, men har problemer med visse AVI-filer fremstillet med CloneDVD.

For at råde bod på dette ville jeg prøve at smide seneste firmware på, men er i den forbindelse stødt på to problemer.

For det første synes jeg ikke jeg kan se, hvilken firmware den kører med nu og for det andet kan jeg ikke få min Vista x64 Ultimate til at 'acceptere' box'en som et eksternt drev. Når jeg sætter USB-kablet i, konstaterer den at der er fundet ny hardware, men driver-installationen kokser og der kommer aldrig noget drev frem.

Nogen der har oplevet lignende og som har fundet en løsning? Nogen der ved, hvor man ser, hvilken firmware der er installeret?

 

På forhånd tak!

 

/Groenbech

Hmm, nu fik jeg løst det ved at smide fw på en usb stick og sætte denne i TViX'en. Men burde jeg ikke få drevet i min stifinder eller er det kun hvis der er sat HDD i boxen?

Iøvrigt er der udkommet en del på det sidste. De ligger her: http://dvdnews.free.fr/TViX/M-6500/

Jeg bruger pt. 1.3.28. De andre beta og pre-release er ikke stabile.
Gad vide, hvorfor de smider så meget lort på gaden, uden først at teste dem

Der skulle komme en ny om et par dage iflg. www.mpcclub.com 

OK - nu har jeg også smidt 1.3.28 på, men jeg har stadig
to problemer som har været der med alle de firmwares jeg
har prøvet.

Først og fremmest - min TVíX er forbundet til mit TV via
HDMI-DVI (HDMI i TViX, DVI i TV) og optisk lyd til min
Yamaha YSP-700. Alt er fint så længe jeg ser TS eller en
ISO af en DVD, og jeg har hentet nogle WMV HD samples
fra Microsofts hjemmeside - disse virker også fint.
Men hvis jeg afspiller .mkv eller .avi har jeg ingen
lyd. .avi hakker desuden - eller rettere - der er en
lille pause hvor billedet fryser i et sekund eller 2 ca.
hvert 15. sekund.
Alle film ligger på mit NAS - kan det være skyld i de
hakkende .avi'er? Hvorfor hakker de andre formater så
ikke?
Hvad med lyden? Er der andre, der har oplevet lignende?

På forhånd tak!

/Grønbech

Download 1.3.52: http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.52.zip

Changes from 1.3.25
- Video related
Added option for 24Hz BCS auto correction.
If you turn this on, the value of brightness is set + 11 and -12 for the contrast when 24Hz is set.
This value is reset to original after back to default TV type.
If you turn this off, the values for Brightness and Contrast will not be changed.
Several HDMI issues are fixed.
24Hz shift issue with Sony, Panasonic and other displays fixed.
Purple image problem fixed.
Now, sends the product information over HDMI.
TS/TP/M2TS files playback improved.
IMG extension is supported now.
It only works with DVD.
Need more field test.
DAT(VCD stream file type) files are now supported.
A couple subtitle issues are fixed.
Subtitles on and off with some files.
Subtitle is not shows if the line is too long.
Supports up to 10 subtitle in one subtitle file.
Fixed the system reboot problem with no menu DVD titles.

Known issues
Some TP/TS information may not correct.
When HD Audio pass-through is on, S/PDIF does not output.
When HD Audio pass-through is off with HD audio stream, the playback is not smooth.
Some TP/TS files may cause the system rebooting.
Some WMV may not play correctly.
The digital output for AAC/WMA is disabled.
Does not support PCM audio track on MP4 now.

Audio and Picture related
Picture playback has been improved.
Improved file compatibility.
Play without a black image between pictures.
Support a transition effect. Fade effect is supported now.
By default the slideshow effect is FADE.
You can change the slideshow delay from 0, 5, 6, 7, 8, 9, 10, 20, 30 to 60.
The maximum resolution we supports is 24M pixels.
The picture will be rotated based on EXIF.
Improved audio play.
APE is now supported.
Now, 2x, 4x play back is supported for MP3, OGG, FLAC and APE.
MP3 compatibility and sound quality has been improved.
Supports MMS protocol for WMA streaming. (ASX)

Known issues
EXIF information showing is disabled.
Sometimes, the audio pitch is not correct.
The digital audio output for the background is corrupted. It works when the analog is selected.

PVR related
Supports T451 DMB-TH tuner
Supports Chinese.
Fixed some channel scanning problem for Bulgaria and Romania.
General
Setup will be backed up on the local HDD so it will be restored after firmware upgrade.
This feature is only available after this firmware. This means your current setting will be reset. There must be local HDD or USB HDD to use this, so if you don't have the local disk, you should use USB to upgrade firmware otherwise, the setup may be cleared.
Setup will be saved before upgrade and every time you shutdown unit.
SAMBA server updated.
It works with Vista.
It supports international characters.
When TVIX connect to SAMBA servers, now shows international characters correctly.
It only shows based on currently selected language.
EDID_failed.ted file is not created anymore not to confuse customers.
Romanian is supported now.
Dutch change to Nederlands
Other minor bug fixes.